Wire H-Stakes (Step Stakes)

The Invisible Backbone of Your Yard Sign

You have designed the perfect sign.
You printed it on durable plastic.

But without a stake, it’s just a piece of plastic lying on the grass.

The Wire H-Stake (Step Stake) is the industry-standard hardware for displaying 4mm Corrugated Plastic signs.

It is:

• Simple

• Affordable

• Installs in seconds

While they all look the same, quality matters.

We use 9-Gauge Galvanized Steel.

Why 9-Gauge? Why Galvanized?

• Why 9-Gauge?
  It is the optimal thickness.
  Thinner wires bend when you push them into hard soil.
  Ours are stiff enough to penetrate the ground without buckling.

• Why Galvanized?
  The zinc coating prevents rust, meaning you can leave these out in the rain or sprinklers without them turning orange and staining your sign.

How It Works: The “Flute” Connection

To use these stakes, your Coroplast sign must have Vertical Flutes
(the hollow channels inside the plastic running up and down).

• Slide Up
  Insert the top two prongs of the “H” into the flutes of your sign.

• Step Down
  Place the sign where you want it and step on the horizontal cross-bar to drive the bottom prongs into the earth.

No tools, no hammers, and no digging required.

Designed for Speed and Volume

This is the “Campaign Standard.”

If you are placing:

• 500 signs for a local election

• A roofing promotion

• A community event

You can’t afford heavy steel frames.

Wire H-Stakes are:

• Lightweight (you can carry 50 in one hand)

• Cost-effective

Allowing you to blanket a neighborhood quickly.

Technical Specifications

⚠️ Important: Vertical Flutes Only

Critical Note:
When ordering your Yard Signs, please ensure you select “Vertical Flutes.”

If the flutes run horizontally, the H-Stake prongs will have nowhere to go!

The Budget-Friendly Anchor

For temporary signage, political campaigns, and directional markers, nothing beats the efficiency of the Wire H-Stake.

It gets the job done simply and securely.